Відео

I'm Glad it was helpful to you! I'm obsessed with Efficiency, and this made our/my life so much easier. :) -Nathan R

@@eneshahdeedee8167 What are you using to get the audio from Playback into your sound system? -Nathan

ProPresenter works great on PC, When they Re-Built it from the ground up back in 2020, they specifically wrote a NEW version for both Mac and PC. The Videos of the Screen Config page from Macs should help you with what you're looking for on PC. -Nathan R

Thanks for Sharing!

Yes, I made a video that I looked at what Apps users should use to control the x32. I don't have any networking Specific Videos. -Nathan R ua-cam.com/video/Li236t3zjQ8/v-deo.html

@@cayman2010 Yes, it’s designed to bring audio into a device. -Nathan

@@SiEmon_E You could return it for an XA65. Which has SDI, or use converters to and from SDI.

@@CrazyAmazingDesigns OK thanks for response. It was shipped from overseas so that might work out expensive for me. I am going to explore fibre hdmi running into a live stream video mixer and see what results I get.

no, as I stated in this video, I was able to extend the desktop to a simngle Apple TV, but there is no way to connect and extend to multiple apple tvs. -Nathan

@@helenhoward5102 No, Song Select creates slides for the whole song. Checkout my video on Importing songs in Pro7. ua-cam.com/video/D3u3dHVl3yc/v-deo.htmlsi=lZ72mSNbfNRwMXJD

Hi, It should just be a matter of getting cables from the different devices that convert to HDMI-A. That should be a straight forward proccess on Amazon. Yes the ATEm switcher should work fine, these have scalers built into each input that allow for different reolution cameras to be connected. -Nathan

Hi, I listed a bunch of stuff in the description of this video. I will not recommend buying New PTZOptics cameras, If you can find a used set, it's still not worth it but at least they are not full price. Canon CR-N300 or N500 is my recommendation. -Nathan

Hi Nathan, You have a great name, as I'm also Nathan. :) That's Awesome you are getting familiar with the x32. I primarily focus on the Routing of audio to and from the x32. I'd suggest Drew Brashlers Videos on Mixing, and EQ etc. -Nathan Robb

Yes, you will be able to do at least 2 external displays with that computer. Basically, The Audience Displays are the Presentation aspects viewed by the Audience, and the Stage Display Screens are the ones for the band. These screens contain the Current and Next Slide of slide text, as well as Countdowns, Slide Notes etc. -Nathan R

@@CrazyAmazingDesigns im trying to figure out how to do it !! I can't seem to know how to do that!! In my church we have 2 audience tvs and we have one in the back, so the ones on stage can see the lyrics and future lyrics coming up , but I can't seem to do it ! With a MacBook Air 😖😖

And I know you can help me out with something ! Thank you Nathan

There is a new feature "Crop & Blur", if you transfer the photos and then import them to the media bin, you can right click and use this feature. -Nathan

We are using these 5V 70Amp 350W Power Supplies: amzn.to/460ySYw

@@CrazyAmazingDesigns thanks! Do you plug these directly into the wall or could you possibly use a power strip?

@@alexguy7704 As long as you don't exceed the circuit limit, or exceed the rating of the power strip then it should be fine. -Nathan If you'd like to book a Zoom Call I'd be happy to connect with you and help think through the details of your project. crazyamazingdesigns.com/training

There is an Apple TV app for Windows, I'm not sure how it works but I imagine it offers some of the same functionality. -Nathan R

No, I was unable to get both tvs connected and displaying the computers extended display. -Nathan R

Glad it was helpful, You could route a channel out via XLR from the X32 and into the Neve 1073, but there are internal effects that can likely provide the same effect. -Nathan

One Apple TV is connected to each TV via HDMI. -Nathan R

And also can each tv connected to apple TV can both run extended display output at the same time

Just create an account and purchase a license. 😀

You might want to watch my video talking about Configuring Screens in ProPresenter. This should help you get the screen config window setup. ua-cam.com/video/JyuktArlmeM/v-deo.html

Hi, If you'd like to show cameras on the screens I'd suggest using a Hardware Video switcher such as the ATEM Mini Extreme, or the ATEM Constellation switcher. Bring in the graphics and cameras to the switcher, Then send the ATEM output to the screens. Basically, build the Live Stream Locally, then use that on the screens. Don't try to create a separate feed. If you used the constellation switcher, you could bring in ProPresenter, + cameras, then send output 1 to the side screens, and output 2 to the center screen. Now you can use a StreamDeck to switch between showing cameras, and ProPresenter on each screen being fed from the switcher. -Nathan R

Playback from MultiTracks.com

I would recommend sending your stream feed to the TVs in your building, focus on building that and then send a copy to the TVs. You would need to use a BlackMagic Design Recorder 3G to get the video into ProPresenter, but the better recommendation would be to use a video switcher to bring in the video, as well as the graphics from ProPresenter7. Use an ATEM Constellation 1/ME and then send the output to the streaming encoder, or use a ATEM Extreme that has a built in streaming encoder, it also has 2 HDMI out, one for Multiview and the second for going to the TVs in the building after you convert to SDI. 😀 -Nathan

No. Mirroring is only possible for a built in display port. The Recorder 3G requires software such as ProPresenter to assign outputs.

The Copyright Look is setup with the intended "copyright" slide on a Theme layer. Then when that Look is active, it will be shown on the StreamOut Layer. -Nathan R

Yes, You can see an iPhone on the same network with the same Apple IP, with the Apple Screen sharing feature from inside ProPresenter.

I don’t have the systems mapped out, but maybe I should work on that. -Nathan! Thank You for watching my videos, I’m glad you have found value from them 😀

@@CrazyAmazingDesigns I have gotten great value in watching the videos. we are a very low membership church in rural Alaskan Bristol Bay. Just trying to keep the people who are further out than us in the extreme rural areas hooked in with the gospel. People seem to watch small channels that are closer to home than the larger churches in the cities. IMHO. Need. to keep costs down as we ramp up tech in and out of the church building. Gods speed in all you do.

@@wesf1178 Love it! Let me know if I can every help with anything. :)

If you click identify and the identifier does not go away, then re-start ProPresenter. I would reach out to support if that does not work, they are quick to respond and this sounds like a weird BUG I have not heard about. -Nathan

Although it is at risk of replacement due to it looking like we recorded the service on a potato, but luckily it isn’t used for the livestream, it is used on a legacy system that makes dvd copies of the service for shut ins

@@nathanharrellyoutube Tragic. The worst part is these cameras are not even (so cheap it does not matter). Potatoes do not make great recordings, I mentioned the image quality of these is also lacking, some of that is because they are mounted 110 ft from the stage at the end of their digital zoom LOL! -Nathan

@@CrazyAmazingDesigns yes they get expensive fast as I browsed many AV websites for Ptz cameras and equipment for our church

@@CrazyAmazingDesigns Our stage is a lot closer to the back of our sanctuary which is where it is mounted and the live stream camera is in a booth right below it.

Couldn't agree more! LOL! Thanks, Uncle. It was good talking on the phone with you about this stuff, Those Canon CR-N300 or N500 PTZ cameras are the best value for the money right now. Keep Rocking the Live Stream at your church :) --Nathan (Not the First in his Class) Robb.

I'd love to use them at my church.

Automating Lyrics requires some sort of Constant. That is usually some sort of Backing track that the Band is playing to. To Time the Slides to the Music, you would need to automate it to a music track. Lyric Slides are not as consistent as for Example every 7.43 seconds apart. -Nathan R

I currently recommend the Mac Studio Computers. They are $2K and do 5 Display Outputs including the operator screen. -Nathan R. With Macs it's more about the display count you need.

Awesome! Glad to hear it 😀

Routing used to be as you say "All or Nothing" Really it was Banks of 8. The USER Routing is how you avoid the Banks of 8, You need to configure things so that USER IN 1-32 are selected, then you can pick and choose for each input. Also, I'm sorry I missed this comment. -Nathan (Email me if you can't get it).

@@CrazyAmazingDesigns Thank you for addressing my question. I will make another attempt at routing via the USER option.

No, The same amount of text has to be on each screen. ProPresenter does a great job of creating multiple outputs of the same content in different configurations. But not different content on the different slides. -Nathan R

@@CrazyAmazingDesigns I appreciate the reply!

I’ve only done 4 videos of this kind. What would you like to see in a Video 5? Dedicated Dante?

@@CrazyAmazingDesigns At the end of this video you say that video 5 will be go deeper into routing & some best practices for user outputs.

😂🫶🫶Yes!! They are also expensive lol! Tragic. 🙃😀

Thank You! You just need ProPresenter on your computer, then connect the Apple TV Stage App to the computer on the same network. -Nathan

@@CrazyAmazingDesigns Thank you!

Hi, I'm not sure what Alex said, but These ATEM switchers only have the single encoder so whatever settings you choose, those same quality settings apply for Streaming and the SSD recording. That means users can't record in the best quality possible to the SSD, and then stream in a lower quality because of bandwidth issues. -Nathan

It's created by using a Stage Display, and a Stage Layout. The Multiview layout is included in my Pro7 Template at CrazyAmazingDesigns.com -Nathan

Yes! My brother built the Garden and It's Fantastic for recording videos & plants. As you know ;) :) -Nathan R

Now you can join the Production Team! -Nathan R

Thank You! Apple TVs are such great tools. -Nathan R